PROFESSIONAL DYNAMIC MICROPHONE

This series professional dynamic microphone is with virtues of wide dynamic range , high definition , good polar pattem and also with advanced artwork , excellent outlook design , durable and stable capacity , which is suitable for stage performance , KTV rooms and speeches…

SPECIFCATION:
1.Polar Pattem : Cardioid –directional (FLGURE 1)
2.Frequency Response :60-16000Hz(FLGURE 1)
3.Impedance:600Ω ±30%(in 1kz)
4.Sensitivity:-58dB±3dB(1V/pa)
5.Output Connector: Balance(with 4.5m cable)
6.Body: ZINC die-cast body

OPERATION
1.Adjust the amplifier system for ready.
2.Plug the cannon connector into the back jack of microphone, put the switch to“OFF”position and then plug the XLRM plug into the amplifier MIC jack .
3.Turn down the volume of the amplifier and then put microphone switch to ”ON”position then speak to the microphone, adjust the amplifier volume control until the volume is suitable.
4.Carefully adjust the tone and volume control of the amplifier until the sound is sharp and satisfied.

CAUTION
1.Don’t put the Mic capsule towards the output speaker of amplifier to prevent whistle.
2.Keep the microphone away from humid and hot place.

Peripherals