Seamless switching matrix for video tracking in wireless conference system

AVA-222P

Four in four out HD seamless switching matrix

Hdmi4x4 matrix (with EDID control) can connect 4 HDMI signal sources to 4 display devices. The host has 4 channels of HDMI output, and each channel of HDMI output supports 1080p Full HD format and all 3D formats. Support independent EDID control. Hdmi4x4 host can be used with Blu ray DVD, digital set-top box, notebook computer and game controller connected to HDMI display. Switch the display through the IR remote control device, RS-232 and TCP / IP provided, or through the selection button on the front panel. This series of products can be widely used in large screen display engineering, multimedia teaching, lecture hall, military command and control center, traffic monitoring, hotel, multimedia conference room, audio-visual exhibition hall and other occasions.

Specification: 4 in and 4 out;

HDMI v1.3 support:, 1080P@30Hz ,and 1080P 3D@60Hz Support 4-channel HDMI video input, 4-channel HDMI output and embedded multi-channel digital audio signal cross switching.

Compatible with all HDTV resolutions including 1080p / 60 and PC resolutions up to 1920 * 1200;

Long line input automatic equalization - ensure that each input can be independently and automatically compensated for signal loss caused by long-distance transmission or use of low-quality lines;

Support HDMI 1.3A, HDCP 1.3, and DVI 1.0 protocols. Support high color depth and up to 2.25gbps speed;

4 input ports support independent EDID

Support RS-232, panel control and TCP / IP control

With power-off memory function and power-off site protection function;

With RS232 communication interface, it can easily communicate with computers, remote control systems or various remote control devices

Front panel LCD display feedback real-time status

Compatible with codes and instructions of all similar products in the market;

High quality, mass production, high compatibility and stability;

Control mode:

Key control: switch directly through the equipment panel;

Remote control: use infrared remote controller for remote control switching;

Software control: use RS232 serial port to control switching;

Central control: use the central control system to control switching (optional);

Network control: control switching through the Internet (optional).

Peripherals